-
IviumBoost 系列儀器是功率增幅器，旨在增加 Ivium 恒電位/恆電流/ZRA 的電位和/或電流。增幅器與電纜相互連接在 P/G 前面。操作設定完全整合於 IviumSoft 中。
若要檢查特定 IviumBoost 是否與您指定的儀器相容，請查看我們以下的相容性表。
IviumBoost 是一個單獨的外部裝置，具有完整的恆電位/恒電流/ZRA分析儀的功能。它可以在 Ivium 恒電位儀的初始訂單中購買，但當然也可以在以後訂購。例如，當您的研究重點轉向更高的功率要求時，IviumBoost 將是增強 Ivium 恒電位儀功能的理想選擇。 -
系統性能 IviumBoost10012
（100A/12V）IviumBoost1010
（10V/10A）IviumBoost205
（20V/5A）IviumBoost1001
（100V/0.6A）電流合規性 ±100A ±10A ±5A ±0.6A 最大合規電壓 ±12V ±10V ±20V ±100V 最大施加電壓 ±10V ±10V ±20V ±100V 恒電位儀 電流範圍 ±10A和 ±100A 透過控制恒電位器來定義 透過控制恒電位器來定義 透過控制恒電位器來定義 環境 電源要求 100-240V, 50-60Hz, 1500W - - - 尺寸（寬 x 深 x 高) 47 x 36 x 14cm 26 x 33 x 12cm 26 x 33 x 12cm 26 x 33 x 12cm 重量 13kg 5.7kg 5.7kg 5.7kg -
The IviumBoost series of instruments are power boosters that have been designed to increase the potential and/or current of Ivium potentiostat/galvanostat/ZRAs. The booster is connected in front of the P/G in-line with the cell cable. The operation is fully integrated in the IviumSoft.
To check if a particular IviumBoost is compatible with your designated instrument, check the compatibility table on our Support page.
The IviumBoost is a separate external instrument and has full potentiostat-galvanostat-ZRA capability. It can be purchased at the initial order of your Ivium potentiostat, but can of course also be ordered at a later time. For example when the emphasis of your research shifts to higher power requirements, an IviumBoost will be ideal to enhance the capability of your Ivium potentiostat.
-
System performance IviumBoost10012
（100A/12V）IviumBoost1010
（10V/10A）IviumBoost205
（20V/5A）IviumBoost1001
（100V/0.6A）Current compliance ±100A ±10A ±5A ±0.6A Maximum compliance voltage ±12V ±10V ±20V ±100V Maximum applied voltage ±10V ±10V ±20V ±100V Potentiostat Current ranges ±10A and ±100A Defined by controlling potentiostat Defined by controlling potentiostat Defined by controlling potentiostat Environment Power requirements 100-240V, 50-60Hz, 1500W - - - Size (w x d x h) 47 x 36 x 14cm 26 x 33 x 12cm 26 x 33 x 12cm 26 x 33 x 12cm Weight 13kg 5.7kg 5.7kg 5.7kg