IKA EUROSTAR 60 Digital Overhead Stirrer
IKA EUROSTAR 60數位頂置攪拌器是一種强大的實驗室攪拌器，可攪拌40升（H2O）的水。它通過微處理器控制科技在0/30–2000 rpm的速度範圍內自動調整速度。安裝的安全電路可確保在防失速失效或超載條件下自動切斷。
保持軸速度與所需速度的連續比較，並自動調整變化。 這保證了即使樣品粘度發生變化，也能保持恒定的速度。
保持軸速度與所需速度的連續比較，並自動調整變化。 這保證了即使樣品粘度發生變化，也能保持恒定的速度。
-
主要功能包括：
- 數位速度顯示
- 無級調速
- 推進式攪拌器軸
- 超載保護
- 短期超載運行
- 薄型外殼
- 安靜操作
- 錯誤代碼顯示
-
Stirring quantity max. per stirring position (H2O) 40 l Motor rating input 176 W Motor rating output 126 W Motor principle Brushless DC Speed display 7 segment LED Speed range 0/30 – 2000 rpm Viscosity max. 50000 mPas Output max. at stirring shaft 126 W Permissible ON time 100 % Torque max. at stirring shaft 60 Ncm Speed control stepless Setting accuracy speed 1 ±rpm Deviation of speed measurement n > 300rpm 1 ±% Deviation of speed measurement n < 300rpm 3 ±rpm Stirring element fastening chuck Chuck range diameter 0.5 – 10 mm Hollow shaft, inner diameter 11 mm Hollow shaft (push-through – when stopped) yes Fastening on stand extension arm Extension arm diameter 16 mm Extension arm length 220 mm Speed control electronic Nominal torque 0.6 Nm Housing material alu-cast coating / thermoplastic polymer Dimensions (W x H x D) 86 x 248 x 208 mm Weight 4.4 kg Permissible ambient temperature 5 – 40 °C Permissible relative humidity 80 % Protection class according to DIN EN 60529 IP 42 Voltage 230 / 115 / 100 V Frequency 50/60 Hz Power input 176 W -
Key features include:
- Digital speed display
- Infinitely adjustable speed
- Push-through agitator shafts
- Overload protection
- Short-term overload operation
- Slim casing
- Quiet operation
- Error code display
-
Stirring quantity max. per stirring position (H2O) 40 l Motor rating input 176 W Motor rating output 126 W Motor principle Brushless DC Speed display 7 segment LED Speed range 0/30 – 2000 rpm Viscosity max. 50000 mPas Output max. at stirring shaft 126 W Permissible ON time 100 % Torque max. at stirring shaft 60 Ncm Speed control stepless Setting accuracy speed 1 ±rpm Deviation of speed measurement n > 300rpm 1 ±% Deviation of speed measurement n < 300rpm 3 ±rpm Stirring element fastening chuck Chuck range diameter 0.5 – 10 mm Hollow shaft, inner diameter 11 mm Hollow shaft (push-through – when stopped) yes Fastening on stand extension arm Extension arm diameter 16 mm Extension arm length 220 mm Speed control electronic Nominal torque 0.6 Nm Housing material alu-cast coating / thermoplastic polymer Dimensions (W x H x D) 86 x 248 x 208 mm Weight 4.4 kg Permissible ambient temperature 5 – 40 °C Permissible relative humidity 80 % Protection class according to DIN EN 60529 IP 42 Voltage 230 / 115 / 100 V Frequency 50/60 Hz Power input 176 W