IKA NANOSTAR 7.5 digital
頂置式攪拌器NANOSTAR 7.5 digital比MICROSTAR 7.5 digital小30%，因此更能同時在節省空間的情況下保持性能不變。NANOSTAR 7.5數位設備具有完美的基本功能，其緊湊的設計讓重量僅為易於操作的0.8公斤。
-
NANOSTAR 7.5 digital可確保在50 - 2.000 rpm的整個轉速範圍內保持恆定扭矩。
使用穩定的旋鈕進行操作且可透過顯示器清楚地顯示轉速。
通過 USB 接口可以快速簡單地進行定期軟體更新。 -
Stirring quantity max. per stirring position (H2O) 5 l Motor rating input 32 W Motor rating output 22 W Motor principle Brushless DC Speed display LED Speed min. 50 rpm Speed min. 0/50 rpm Speed max. 2000 rpm Viscosity max. 4000 mPas Output max. at stirring shaft 15.7 W Permissible ON time 100 % Torque max. at stirring shaft 7.5 Ncm Speed control Turning knob Setting accuracy speed 1 ±rpm Deviation of speed measurement n > 300rpm 1 ±% Deviation of speed measurement n < 300rpm 3 ±rpm Stirring element fastening chuck Chuck range diameter 0.5 – 8 mm Hollow shaft, inner diameter 8.5 mm Hollow shaft (push-through – when stopped) yes Fastening on stand extension arm Extension arm diameter 13 mm Extension arm length 160 mm Nominal torque 0.075 Nm Timer display none Housing material alu-cast coating / thermoplastic polymer Dimensions (W x H x D) 53 x 147 x 130 mm Weight 0.8 kg Permissible ambient temperature 5 – 40 °C Permissible relative humidity 80 % Protection class according to DIN EN 60529 IP 54 USB interface yes Voltage 100 – 240 V Frequency 50/60 Hz Power input 32 W Power input standby 0.3 W DC Voltage 24 V= Current consumption 1300 mA -
NANOSTAR 7.5 digital guarantees a constant torque over the entire rpm range from 50 – 2.000 rpm.
Operation takes place using a stable rotary knob. The display clearly shows the rotational speed.
Regular software updates can be undertaken rapidly and simply via the USB interface.
-
Stirring quantity max. per stirring position (H2O) 5 l Motor rating input 32 W Motor rating output 22 W Motor principle Brushless DC Speed display LED Speed min. 50 rpm Speed min. 0/50 rpm Speed max. 2000 rpm Viscosity max. 4000 mPas Output max. at stirring shaft 15.7 W Permissible ON time 100 % Torque max. at stirring shaft 7.5 Ncm Speed control Turning knob Setting accuracy speed 1 ±rpm Deviation of speed measurement n > 300rpm 1 ±% Deviation of speed measurement n < 300rpm 3 ±rpm Stirring element fastening chuck Chuck range diameter 0.5 – 8 mm Hollow shaft, inner diameter 8.5 mm Hollow shaft (push-through – when stopped) yes Fastening on stand extension arm Extension arm diameter 13 mm Extension arm length 160 mm Nominal torque 0.075 Nm Timer display none Housing material alu-cast coating / thermoplastic polymer Dimensions (W x H x D) 53 x 147 x 130 mm Weight 0.8 kg Permissible ambient temperature 5 – 40 °C Permissible relative humidity 80 % Protection class according to DIN EN 60529 IP 54 USB interface yes Voltage 100 – 240 V Frequency 50/60 Hz Power input 32 W Power input standby 0.3 W DC Voltage 24 V= Current consumption 1300 mA