PAT-Channel-1
PAT-Channel-1 型號：PAT-Channel-1
Single channel station for one test cell, fully equipped with PStat/GStat/EIS
-
Single channel station for one test cell
Product description
The PAT-Channel-1 is a fully featured, single channel potentiostat / galvanostat/ impedance analyzer which is operated in conjunction with a PAT-Controller. It has a docking socket for one PAT series test cell and external connectors to connect a test cell of a different type or a separate docking station.This enables, for example, another docking station with a PAT-Cell to be tested in a temperature cabinet at elevated temperatures, that would otherwise be too high for the tester’s electronics.
-
Specifications
Length 164 mm Height 97 mm Width 105 mm Weight 1.3 kg Temperature operation range -20 to + 40 °C Humidity Non-condensing 
Accuracy Contour Plot
General
# Channels per device 1 Voltage -7 V to +7 V Current ±100 mA Cell connection / Electrode connection 3 electrodes plus sense wires, Connection matrix ADC 2 x 24 Bit DAC 1 x 18 Bit Bandwidth ranges (Stability Factor) 500 kHz (fast) 50 kHz (medium) 5 kHz (slow) Acquisition Time (Time Base) 1 ms Voltage
Acquisition of ... Full cell voltage Both half cell voltages Auxiliary voltage Measurement Accuracy ±0.02% of FSR Control Resolution 57 μV (18 Bit) Current
Current Ranges ±100 mA ±10 mA ±1 mA ±100 μA Autorange Measurement Noise floor <1 μA @ 100mA <100 nA @ 10mA <10 nA @ 1mA <1 nA @ 100μA Measurement Accuracy ±0.05% of FSR Control Resolution 1 nA min. (18 Bit) Impedance (each channel)
Frequency range 100 μHz to 100 kHz Impedance mode PEIS and GEIS (simultaneous measurement of full- and half-cell impedances Impedance range 1 mΩ to 100 MΩ