產品功能
features
-
變壓器油全自動取樣分析器
ENERGY SUPPORT TOP-TOGA AutosamplerENERGY SUPPORT TOP-TOGA Autosampler- 為操作簡單、強固耐用的樣品盤，專用於變壓器油樣的完全真空除氣，能體現最佳的價值、節省時間，並具備優異的性能。
- 從變壓器提取油樣後，不用再更換油樣容器，只須將注射器插入絶對無汙染的樣品盤，便可進行多達16個油樣的分析，無須人員看守。
- 直接測量總氣體含量，並以整合的Expert System軟體進行資料評估；可進行單次或多次測量。
- 全自動的程序。
加入諮詢加入諮詢 -
EL-Software
EL-SoftwareEL-SoftwareMonitoring, analysis and management solution for EL-CELL battery testers
- Design and setup experiments
- Powerful script editor for complex test procedures
- Monitor, plot and evaluate test data in real-time
加入諮詢加入諮詢 -
ECC-CellLoad
ECC-CellLoadECC-CellLoadElectrode alignment and assembly tool
- Highly precise alignment of the two electrodes
- Suitable for electrodes of 18 mm diameter
- Easy handling
- Suitable for ECC-Std and ECC-Press-Air(-DL)
加入諮詢加入諮詢 -
PAT-Stand-1 U
PAT-Stand-1 UPAT-Stand-1 USingle channel docking station with flexible signal assignment for specialized PAT-Cells.
- Docking station for use with a single PAT-Cell-TwinRef.
- May be used to connect with any other PAT series test cell. All signals of the respective test cell are available through banana sockets at the front panel.
- Compatible with any potentiostat or battery tester.
加入諮詢加入諮詢 -
PAT-Channel-1
PAT-Channel-1PAT-Channel-1Single channel station for one test cell, fully equipped with PStat/GStat/EIS加入諮詢加入諮詢 -
PAT-Cell-Force
PAT-Cell-ForcePAT-Cell-ForceOperando test cell for investigating battery materials under defined force, temperature and gas pressure
- Force adjustment and measurement, up to 1500 Newton
- Built-in temperature, force and gas pressure sensors
- Cableless connection via PAT socket, with electronic cell tag (PAT-Button)
加入諮詢加入諮詢 -
ECC-Opto-Std-Aqu
ECC-Opto-Std-AquECC-Opto-Std-AquTest cell for optical characterization in the reflective mode – with face-to-face arrangement of electrodes. For aqueous electrolytes.
- 2- and 3-electrode cell with optical window for aqueous electrochemistry
- Materials in media contact are gold, PEEK and EPDM
- Typically used in combination with optical or Raman microscopy in the reflection mode.
- PRODUCT DETAILS
加入諮詢加入諮詢 -
ECC-Air
ECC-AirECC-AirTest cell for the electrochemical characterization of gas diffusion electrodes in aprotic electrolytes
- Fast assembly and dismantling and easy cleaning of cell components
- Small and defined electrolyte volume down to 0.05 cm3
- Electrodes are easily accessible for post-mortem analysis
加入諮詢加入諮詢 -
ECC-Combi
ECC-CombiECC-CombiApplicable both as 2- and 3-electrode test cell for aprotic systems with reference electrode holder
- Adjustable, reproducible and homogeneous mechanical pressure on electrodes
- Electrodes are easily accessible for post-mortem analysis
- Easy and reliable electrolyte filling upon assembly
- Fast assembly and dismantling, and easy cleaning of cell components
加入諮詢加入諮詢
