產品功能
features
-
加強型變壓器線上油中氣體|濕氣監視器（具更長的感測器壽命）
GE Enhanced Monitoring DGA with Extended Sensor Life for TransformersHydran M2-X- Hydran M2-X是GE Hydran油中氣體監測系列的新一代機型，為固定安裝型式，可連續監測油中氣體與水分位準，以警示人員關於發展中的故障狀態及最大程度地降低意外停機的風險。
- 全球安裝實績超過50,000套，評估的感測器壽命超過10年。
- 體積小、無移動式部件、低維護需求、容易安裝在一個單閥上（通常無須停機）、適用資產績效管理（APM）軟體分析，可在變壓器機群進行佈署配置。
- 提供傳統的“複合氣體”感測器（氫H₂、一氧化碳CO、乙炔C₂H₂、乙烯C₂H₄）或“只有氫氣”感測器（H₂）兩種型式。
- 適用於對廣泛的使用礦物絶緣油或天然與合成酯類油的各種變壓器，進行狀態監測。
- 除了油中氣體監測功能外，經由感測器的連接，還可監測其它參數例如：頂部油溫、負載電流及透過IEEE標準變壓器數學模型，進一步提供更深入的變壓器狀態變化資訊。
加入諮詢加入諮詢 -
變壓器油全自動取樣分析器
ENERGY SUPPORT TOP-TOGA AutosamplerENERGY SUPPORT TOP-TOGA Autosampler- 為操作簡單、強固耐用的樣品盤，專用於變壓器油樣的完全真空除氣，能體現最佳的價值、節省時間，並具備優異的性能。
- 從變壓器提取油樣後，不用再更換油樣容器，只須將注射器插入絶對無汙染的樣品盤，便可進行多達16個油樣的分析，無須人員看守。
- 直接測量總氣體含量，並以整合的Expert System軟體進行資料評估；可進行單次或多次測量。
- 全自動的程序。
加入諮詢加入諮詢 -
EL-Software
EL-SoftwareEL-SoftwareMonitoring, analysis and management solution for EL-CELL battery testers
- Design and setup experiments
- Powerful script editor for complex test procedures
- Monitor, plot and evaluate test data in real-time
加入諮詢加入諮詢 -
ECC-CellLoad
ECC-CellLoadECC-CellLoadElectrode alignment and assembly tool
- Highly precise alignment of the two electrodes
- Suitable for electrodes of 18 mm diameter
- Easy handling
- Suitable for ECC-Std and ECC-Press-Air(-DL)
加入諮詢加入諮詢 -
PAT-Stand-1 U
PAT-Stand-1 UPAT-Stand-1 USingle channel docking station with flexible signal assignment for specialized PAT-Cells.
- Docking station for use with a single PAT-Cell-TwinRef.
- May be used to connect with any other PAT series test cell. All signals of the respective test cell are available through banana sockets at the front panel.
- Compatible with any potentiostat or battery tester.
加入諮詢加入諮詢 -
PAT-Channel-1
PAT-Channel-1PAT-Channel-1Single channel station for one test cell, fully equipped with PStat/GStat/EIS加入諮詢加入諮詢 -
PAT-Cell-Force
PAT-Cell-ForcePAT-Cell-ForceOperando test cell for investigating battery materials under defined force, temperature and gas pressure
- Force adjustment and measurement, up to 1500 Newton
- Built-in temperature, force and gas pressure sensors
- Cableless connection via PAT socket, with electronic cell tag (PAT-Button)
加入諮詢加入諮詢 -
ECC-Opto-Std-Aqu
ECC-Opto-Std-AquECC-Opto-Std-AquTest cell for optical characterization in the reflective mode – with face-to-face arrangement of electrodes. For aqueous electrolytes.
- 2- and 3-electrode cell with optical window for aqueous electrochemistry
- Materials in media contact are gold, PEEK and EPDM
- Typically used in combination with optical or Raman microscopy in the reflection mode.
- PRODUCT DETAILS
加入諮詢加入諮詢 -
ECC-Air
ECC-AirECC-AirTest cell for the electrochemical characterization of gas diffusion electrodes in aprotic electrolytes
- Fast assembly and dismantling and easy cleaning of cell components
- Small and defined electrolyte volume down to 0.05 cm3
- Electrodes are easily accessible for post-mortem analysis
加入諮詢加入諮詢
