0 like search mail home
選擇品牌 arrow_down

真空脫氣機組

CMM-10 MOBILE OIL PLANT 型號:CMM-10
該裝置是一個獨立的單元,所有部件和操作組件都有金屬板保護,裝置的側面和後面有易於打開的氣動彈簧門。集裝箱式裝置可以安裝在符合《道路交通法規》的雙軸拖車上,並被拖到任何偏遠的地方。
  • 該裝置是一個獨立的單元,所有部件和操作組件都有金屬板保護,裝置的側面和後面有易於打開的氣動彈簧門。集裝箱式裝置可以安裝在符合《道路交通法規》的雙軸拖車上,並被拖到任何偏遠的地方。

    優勢

    • 變壓器油的耐壓強度可以提高到70kV以上。
    • 同時進行變壓器乾燥和油處理 。
    • 在電氣設備中初次注入絕緣油處理。
    • 對變壓器和其他電氣設備進行真空處理。
    • 易於操作和服務。
  • Parameter Value
    Capacity, m3/hour / gals. per hour:  
    • degassing, drying and filtration mode
    10/2642
    • heating and filtration mode
    15/3970
    Processed oil parameters*:  
    • volumetric gas content %, max
    0.1
    • mass moisture content, ppm, max
    10
    • filtration fineness, micron
    1
    Oil output temperature in heating mode, ºС/ ºF 90/194
    Outlet pressure, MPa 0.4
    Oil heater power, kW 180
    Max power consumption, kW 210
    Residual pressure in vacuum chamber during degassing, mbar, max 267
    Residual pressure in vacuum chamber during air tightness test, mbar, max 26.7
    Air leak into the chamber in 1 hour, mbar max: 267
    Electric power parameters  
    • voltage, V
    415
    • AC frequency, Hz**
    50/60
    Dimensions, mm/ft, max  
    • length
    4750/15’7’’
    • height
    2100/6’11’’
    • width
    2320/7’7’’
    Weight, kg/lbs, max 3500/7735

    Note: * initial oil parameters:

    • volumetric gas content – below 5%;
    • mass moisture content – below 01% (100 g/ton);
    • temperature – above 0 ºС/ 32 ºF.

    **All equipment sold in the USA is designed to operate on 60 Hz AC Power

  • The unit is built as a self-contained unit with all components and operating assemblies protected by metal panels and easy opening gas-spring loaded doors on the sides and back of the unit. The “Containerized”unit is placed on a tandem axle trailer that is street legal and ready to be towed to any remote  location.

    The unit consists of a vacuum chamber, input and output oil pumps, coarse and fine filters, oil trap, oil heater, pipelines with valves, vacuum pump section and a control cabinet.

    ADVANTAGES

    • transformer oil dielectric strength increase to at least 70 kV;
    • transformer drying with simultaneous oil processing;
    • initial filling of electrical equipment with insulation oil;
    • evacuation of transformers and other electrical equipment;
    • simple operation and servicing.
  • Parameter Value
    Capacity, m3/hour / gals. per hour:  
    • degassing, drying and filtration mode
    10/2642
    • heating and filtration mode
    15/3970
    Processed oil parameters*:  
    • volumetric gas content %, max
    0.1
    • mass moisture content, ppm, max
    10
    • filtration fineness, micron
    1
    Oil output temperature in heating mode, ºС/ ºF 90/194
    Outlet pressure, MPa 0.4
    Oil heater power, kW 180
    Max power consumption, kW 210
    Residual pressure in vacuum chamber during degassing, mbar, max 267
    Residual pressure in vacuum chamber during air tightness test, mbar, max 26.7
    Air leak into the chamber in 1 hour, mbar max: 267
    Electric power parameters  
    • voltage, V
    415
    • AC frequency, Hz**
    50/60
    Dimensions, mm/ft, max  
    • length
    4750/15’7’’
    • height
    2100/6’11’’
    • width
    2320/7’7’’
    Weight, kg/lbs, max 3500/7735

    Note: * initial oil parameters:

    • volumetric gas content – below 5%;
    • mass moisture content – below 01% (100 g/ton);
    • temperature – above 0 ºС/ 32 ºF.

    **All equipment sold in the USA is designed to operate on 60 Hz AC Power