0 like search mail home
選擇品牌 arrow_down

CALMET

  • 三相全自動測試系統

    三相全自動測試系統

    Three-phase Fully Automatic Test System with Reference Standard and Integrated C
    TS33

    The Calmet TS33 portable test system consists of a three-phase reference meter of accuracy class 0.04% (or 0.1%) and an integrated three-phase current and voltage source up to 3x120A/600V

    加入諮詢
    加入諮詢
  • 動力工程設備的三相功率校正器和測試儀

    動力工程設備的三相功率校正器和測試儀

    Three Phase Power Calibrator and Tester of Power Engineering Devices
    C300B

    Three phase, class 0.02 and 0.05 power quality calibrator up to 120A (360A) and 560VAC with programmable power quality parameters. It makes possible to make automatic test of electricity meters, measurement transducers, current transformers and protection relays

    加入諮詢
    加入諮詢
  • 功率校正器和保護繼電器測試儀

    功率校正器和保護繼電器測試儀

    Power calibrator and protection relay test set
    CP11B

    Single phase, class 0.02 and 0.05 power quality calibrator up to 120A and 560VAC with programmable power quality parameters. It makes possible to make automatic test of electricity meters, measurement transducers, current transformers and protection relays

    加入諮詢
    加入諮詢
  • 儀表誤差計算器

    儀表誤差計算器

    Meter error calculator
    MPX8

    Eight channel meter error calculator together with C300 calibrator is used for testing simultaneously up to eight electricity meters

    加入諮詢
    加入諮詢
  • 單相功率校正器

    單相功率校正器

    Single phase power calibrators
    C250

    Single phase power calibrators with predefined settings. It makes possible to effective adjust and test measuring instruments.

    加入諮詢
    加入諮詢
  • 單相功率校正器

    單相功率校正器

    Single phase power calibrator
    C200

    Series of single phase sources of voltage and current, up to 20A or 100A and set phase and frequency. They make possible to check power analysers clamps up to 1000A. Used also as a phantom load for single phase electricity meters checking.

    加入諮詢
    加入諮詢
  • 多功能校正器

    多功能校正器

    Multifunction calibrator
    C101

    Series of small dimensions calibrators of AC and DC voltage and current up to 1100V and 100A, with high load possibility.
    It allows checking of economical multimeters and clamps meter

    加入諮詢
    加入諮詢
  • 電錶測試儀

    電錶測試儀

    Electricity meters tester
    Caltest 10

    Single phase portable electricity meters tester class 0.5 powered from tested circuit with load force possibility apart from tested object. There is no need to disconnect the users during measurement

    加入諮詢
    加入諮詢
  • 電錶測試儀

    電錶測試儀

    Electricity meters tester
    Calport 100

    Electricity meters tester class 0.1 or 0.2 and analyser of power network quality and network connection correctness. It makes possible electricity meters testing on the site or in the laboratory.

    加入諮詢
    加入諮詢
  • 單相交流電流源

    單相交流電流源

    Single phase AC current source
    CC11

    The CC11 is single phase AC current source class 0.2 with signal frequency equal to 50/60Hz and with phase shift 0° or 180° relative to the supply voltage. The CC11 enables to generate current in range up to 5A at the supply voltage 85..264V

    加入諮詢
    加入諮詢