-
AARONIA AG
-
ADASH
-
Amptek
-
AOiP
-
AstroNova
-
AWSensors
-
Automatic Research
-
BASI
-
BRS
-
BWB Technologies
-
Cmc
-
CTRL
-
CALMET
-
CHECKLINE
-
Coxem
-
C-Tech
-
DV Power
-
DANATRONICS
-
ECH
-
Elsys
-
Enervac
-
Enapter
-
ELVEFLOW
-
EA Technology
-
EL-CELL
-
ENERGY SUPPORT
-
Electrothermal
-
FASTEC
-
GE
-
GMW
-
Gaskatel
-
GIUSSANI
-
Globecore
-
GREENLIGHT
-
GRZ
-
HTW
-
HIGH SENSE SOLUTIONSHTW
-
HUBER
-
Labnics
-
Ida
-
LIQUID
-
Instytut Fotonowy
-
KEHUA TECH
-
JGG
-
HVPD
-
Jenway
-
Jacomex
-
IVIUM
-
ndb
-
OZM
-
Redoxme
-
Serstech
-
SATIR
-
VacCoat
-
Zurich
- AARONIA AG
- ADASH
- Amptek
- AOiP
- AstroNova
- AWSensors
- Automatic Research
- BASI
- BRS
- BWB Technologies
- Cmc
- CTRL
- CALMET
- CHECKLINE
- Coxem
- C-Tech
- DV Power
- DANATRONICS
- ECH
- Elsys
- Enervac
- Enapter
- ELVEFLOW
- EA Technology
- EL-CELL
- ENERGY SUPPORT
- Electrothermal
- FASTEC
- GE
- GMW
- Gaskatel
- GIUSSANI
- Globecore
- GREENLIGHT
- GRZ
- HTW
- HIGH SENSE SOLUTIONSHTW
- HUBER
- Labnics
- Ida
- LIQUID
- Instytut Fotonowy
- KEHUA TECH
- JGG
- HVPD
- Jenway
- Jacomex
- IVIUM
- ndb
- OZM
- Redoxme
- Serstech
- SATIR
- VacCoat
- Zurich
三相全自動測試系統
Three-phase Fully Automatic Test System with Reference Standard and Integrated C 型號：TS33Calmet TS33便攜式測試系統由0.04%精度等級（或 0.1%）的三相參考表和高達 3x120A/600V的整合三相電流和電壓源所組成
-
- 在精確負載條件下使用整合電流和電壓源輕鬆驗證儀表
- 無需外部電腦即可通過預先定義的負載點自動運行
- 用於儲存客戶數據和測量結果的32GB SD快閃記憶卡
- 利用顯示向量圖、相序、波形示波器、斜波示波器和趨勢圖來分析電源狀況
- 方便使用於組合源和參考儀表的數據輸入和操作的系統
- 該系統可用作0.04或0.1級的獨立參考標準儀表、與整合電源一起使用、或用作0.1級的獨立三相功率校準器
- 通過USB、以太網和藍牙進行數據讀取和測試系統控制
-
Weight and dimensions (width x height x depth)
22kg and (550x345x200) mm
Power supply
85…265V / 47...63Hz / 400VA
Safety: Isolation protection and Measurement Category
IEC 61010-1 and 300V CAT III
Degree of protection
IP-30 (housing open) / IP-67 (housing closed)
Operation / storage temperature
-10…+50°C / -20…+60°C
Operation / storage relative humidity
<90% @ +0...+30°C and <75% @ +30...+50°C / <95% @ 0...+50°C
-
- Easy verification of meters under precise load conditions, using integrated current and voltage source
- Automatic operation with predefined load points without the need of an external PC
- Modern SD flash memory card up to 32GB for storage of customer data and measurement results
- Display of vector diagram, phase sequence, wave form oscilloscope, harmonics spectrum bar and trend charts for analysis of the mains conditions
- User-friendly system for data input and operation of combined source and reference meter
- The system may be used either as a stand-alone reference standard meter class 0.04 or 0.1, or together with the integrated power source, or as a stand-alone three-phase power calibrator class 0.1
- Data readout and test system control via USB, Ethernet and Bluetooth
-
Weight and dimensions (width x height x depth)
22kg and (550x345x200) mm
Power supply
85…265V / 47...63Hz / 400VA
Safety: Isolation protection and Measurement Category
IEC 61010-1 and 300V CAT III
Degree of protection
IP-30 (housing open) / IP-67 (housing closed)
Operation / storage temperature
-10…+50°C / -20…+60°C
Operation / storage relative humidity
<90% @ +0...+30°C and <75% @ +30...+50°C / <95% @ 0...+50°C