0 like search mail home
選擇品牌 arrow_down

ndb

  • ADD™

    ADD™

    Online partial discharge detector for overhead accessories
    ADD™
    The ADD™ allows online partial discharge detection on medium voltage accessories such as: Arresters, dry type transformers, bushings, insulators, etc… The partial discharge level is displayed by visual and audible indicators. The remote display module also allows to read the levels from a great distance for maximal safety.
    加入諮詢
    加入諮詢
  • PD-LT™

    PD-LT™

    Online partial discharge detector for overhead accessories
    PD-LT™
    The PD-LT™ allows for online partial discharge detection on cable accessories such as cable heads, light­ning arrestors, insulators, bushings, and more. Instantaneouspartial discharge readings are transmitted to a rug­ged wireless display module for easy analysis.
    加入諮詢
    加入諮詢
  • NDB-DOC-3™

    NDB-DOC-3™

    Distribution transformer tester
    NDB-DOC-3™
    The NDB-DOC-3™ is a test instrument designed for distribution networks transformers from 5kVA to 3MVA. It can determine the presence of short circuits or open circuits in the distribution transformer primary winding & also short circuits on the secondary winding.
    The NDB-DOC-3™ is designed to be operated without disconnecting the transformer’s secondary windings from their loads.
    加入諮詢
    加入諮詢
  • SPI-III™

    SPI-III™

    True Phase Identification System
    SPI-III™
    Our vision has always been to create a phase identification system that exceeds any of today’s industry quality, safety and efficiency requirements. SPI-III’s unique design consists of a wireless bi-module combo that is stunningly easy to configure and operate. With many advancements and innovations, SPI-III will be more helpful than ever before, enabling field applications such as identification of A-B-C electrical phases from all 50 and 60 Hz networks, switchgear phase concordance (matching), phase rotation, system paralleling, underground phasing applications and more.
    加入諮詢
    加入諮詢
  • VCi-3™

    VCi-3™

    VCi-3™
    The VCi-3™ system is designed for cable and phase identification, mainly for instal­lation or maintenance purposes on three-phase electrical networks during power shutdowns.
    The transmitter module injects a low current on the cable conductors by direct con­tact or magnetic clamps methods. A voice message is recorded by the user and will be transmitted along with digital signals. Groundings stay connected at both ends of the three-phase circuit during the test. The detector module is used at the other end of the cable system.
    加入諮詢
    加入諮詢
  • LCI™

    LCI™

    LCI™ Energized cable identification system
    LCI™
    The LCI™ system is intended for energized cable identification on secondary and primary circuits. This innovative solution features a dual frequency technique that eliminates false identifications. The LCI™ is designed to be easy to use, safe for the user and cost-effective.
    加入諮詢
    加入諮詢
  • NDB-DOC™

    NDB-DOC™

    Distribution transformer tester
    NDB-DOC™
    The NDB-DOC™ is a test instrument designed for distribution networks transformers from 10kVA to 2500kVA. It can determine the presence of short circuits or an open circuit in the distribution transformer primary winding & also short circuits on the secondary winding. The NDB-DOC™ is designed to be operated from an arial device or from the ground at the end of a hot stick without disconnecting the transformer’s secondary windings.
     
    加入諮詢
    加入諮詢
  • DOC-2000™

    DOC-2000™

    DOC-2000™
    The DOC-2000™ is a test instrument designed for distribution networks transformers up to 167KVA. It can determine the presence of short circuits or an open circuit in the distribution transformer primary winding & also short circuits on the secondary winding. The DOC-2000™ is designed to be operated from an arial device or from the ground at the end of a hot stick without disconnecting the transformer’s secondary windings.
    加入諮詢
    加入諮詢