電力校正器 / 三相電力品質校正器
-
三相全自動測試系統
Three-phase Fully Automatic Test System with Reference Standard and Integrated CTS33The Calmet TS33 portable test system consists of a three-phase reference meter of accuracy class 0.04% (or 0.1%) and an integrated three-phase current and voltage source up to 3x120A/600V
加入諮詢加入諮詢 -
動力工程設備的三相功率校正器和測試儀
Three Phase Power Calibrator and Tester of Power Engineering DevicesC300BThree phase, class 0.02 and 0.05 power quality calibrator up to 120A (360A) and 560VAC with programmable power quality parameters. It makes possible to make automatic test of electricity meters, measurement transducers, current transformers and protection relays
加入諮詢加入諮詢 -
功率校正器和保護繼電器測試儀
Power calibrator and protection relay test setCP11BSingle phase, class 0.02 and 0.05 power quality calibrator up to 120A and 560VAC with programmable power quality parameters. It makes possible to make automatic test of electricity meters, measurement transducers, current transformers and protection relays
加入諮詢加入諮詢 -
儀表誤差計算器
Meter error calculatorMPX8Eight channel meter error calculator together with C300 calibrator is used for testing simultaneously up to eight electricity meters
加入諮詢加入諮詢 -
單相功率校正器
Single phase power calibratorsC250Single phase power calibrators with predefined settings. It makes possible to effective adjust and test measuring instruments.
加入諮詢加入諮詢 -
單相功率校正器
Single phase power calibratorC200Series of single phase sources of voltage and current, up to 20A or 100A and set phase and frequency. They make possible to check power analysers clamps up to 1000A. Used also as a phantom load for single phase electricity meters checking.
加入諮詢加入諮詢