Sonel

• 

  MRU-11

  Earth Resistance and Soil Resistivity Meter

  MRU-11

  The Sonek MRU-11 earth resistance and soil resistivity meter is a simple meter that allows for measuring the earth resistance using the 3 pole and 4 wire method and the soil resistivity using the Wenner method. The instrument is easy to use, interference resistant and highly accurate.
  MRU-11 is a basic device which, on the basis of the measurement result obtained, allows for checking the quality of the earthing system. With its ergonomic design, durable and robust casing and large, easy-to-read display, the meter is ideal for use in the field as well as in most work environments.

  加入諮詢

  加入諮詢
• 

  MMR-640

  Low Resistance Meter

  MMR-640

  The MMR-640 meter is designed to measure very low resistance of resistive objects. This product is made to be used in
  power plants, railways and maintenance companies to measure resistance of:

  加入諮詢

  加入諮詢
• 

  LKZ-1000

  Wires and pipe locato

  LKZ-1000

  • Passive or active modes of tracing.
  • Detection of underground live wires.
  • Detection of underground wires with no voltage (radio mode).
  • Detection of underground wires with no voltage using a transmitter (galvanised, inductive or clamp-based connection).
  • Tracing metallic or non-conductive pipes using an additional probe.
  • Tracing non-conductive pipelines using a “floating” probe.
  • Tracing a determined cable.
  • Determining the depth of a cable.

  加入諮詢

  加入諮詢
• 

  LKZ-720

  Wires and pipe locator

  LKZ-720

  • Detection of wires and cables (live or not)
    • detection of cables in ceilings, walls and floors,
    • detection of breaks in cables,
    • tracing cables in building installation,
    • locating power points and switches in buildings,
    • locating short circuits between leads,
    • tracing shielded cables,
    • tracing cables in metal ducts.
  • Identification of fuses on the distribution board.
  • Tracing underground cables.
  • Tracing conductive water and heating pipelines.
  • Non-contact detection of live cables.

  加入諮詢

  加入諮詢
• 

  TDR-410

  TDR – Time-domain reflectometer

  TDR-410

  Device capabilities:

  • Location damaged power cables.
  • Fault location copper telecom cables.
  • Coaxial cable fault location.
  • Fault location wiring infrastructure.
  • Detection of breaks, short circuits, damage caused by dampness and other changes in impedance of the cable.
  • Graphic depiction of damage the cable with automatic indication the distance to fault on the screen.

  加入諮詢

  加入諮詢
• 

  CMP-400

  Digital Clamp-On Multimeter

  CMP-400

  DC current measurement (CMP-401 only) and AC current. AC/DC voltage measurement up to 600 V.

  加入諮詢

  加入諮詢
• 

  CMP-401

  Digital Clamp-on multimeter

  CMP-401

  DC current measurement and AC current.

  加入諮詢

  加入諮詢
• 

  CMP-200

  Digital Clamp-on AC leakage current meter

  CMP-200

  The CMP-200 digital clamp meter has been designed for clamp measurements of AC leakage current. AC current measurement up to 200 A.

  • high resolution (0,1 mA),
  • three measuring ranges: 200 mA, 2 A, 200 A.

  加入諮詢

  加入諮詢
• 

  CMP-1006

  Digital Clamp-on multimeter

  CMP-1006

  Measurement functions:

  • (TRUE RMS) up to 1000 A.
  • Measurement of INRUSH current in start-up phase of electrical device (high frequency of sampling)
  • AC/DC voltage measurement (TRUE RMS) up to 600 V.
  • Resistance measurement and continuity test:
    • continuity test with acoustic signalling (beeper) for resistance below 40.
  • Temperature measurement (Fahrenheit and Celsius units).
  • Frequency measurement.
  • Duty cycle measurement.
  • Diode test.

  加入諮詢

  加入諮詢
• 

  CMP-2000

  Digital clamp-on multimeter

  CMP-2000

  Universal clamp meter, enabling the maintenance of current measurements up to 2000 A, with the diameter of the clamp as 57 mm, and bus bar to 70 * 18 mm
  The instrument has an electronic overload protection of all functions and ranges.

  加入諮詢

  加入諮詢