中壓與低壓電纜識別器

在進行電氣維護作業時，為符合安全標準，必須在操作電纜之前，明確地識別已停電的電纜。

若誤將錯誤的電纜切斷，可能導致以下後果：

• 危及人員生命安全
• 造成電力供應中斷

Ariadna CI 電纜識別器是一款先進且操作簡便的數位工具，可協助使用者從多條導體中，輕鬆識別各種電纜，包括已停電電纜、帶電中壓電纜及帶電低壓電纜。適用場所包括電纜溝、人孔、配電盤、架空線與地下電纜的轉換處等。

只需一台設備，即可識別中壓與低壓的各種類型電纜，且識別前無須進行校準。

Ariadna CI 已獲全球領先的電力公用事業公司採用，並納入其電氣安全作業程序的標準化應用。

主要特點

• 安全地識別電纜
• 識別已停電電纜
• 識別帶電中壓電纜
• 識別帶電低壓電纜
• 適用於單相及三相電纜
• 訊號注入方式：
  • 直接連接
  • 透過環形感應夾鉗進行感應注入（選配）
• 最大電纜長度：50 km（直接連接）
• TX 發射器配備可充電電池，運作時間超過 24 小時
• 可偵測主動訊號的振幅與極性
• CI-RX 接收器配備識別聲音警示功能

觀看影片：Ariadna CI MV energized cable identifier 

使用Ariadna CI進行帶電中壓電纜識別

Ariadna CI 電纜識別

操作示意圖

帶電中壓電纜識別 | 連接示意圖

帶電低壓電纜識別 | 連接示意圖

已停電電纜識別（中壓與低壓）| 連接示意圖

單相電纜

直接連接
感應式連接

三相電纜

直接連接
感應式連接

*規格如有變更，恕不另行通知。

Ariadna CI-TX Transmitter

Ariadna CI-RX Receiver

符合標準

- 電磁相容性： EN 61000-6-3、EN 61000-6-2

- 電氣安全： EN 61010-1 CAT IV 300 V；電擊防護 Class II

In electrical maintenance works, in order to cope with safety standards, it becomes necessary to identify correct cable unambiguously prior to its manipulation. Cutting the wrong cable may result in the following consequences:

• personnel live threat
• power supply failure

The Ariadna CI – Cable Identifier is an advanced, yet simple to operate, digital tool. It helps users to easily identify any de-energized electric cables, energized MV cables and energized  LV cables, among multiple conductors, in trenches, manholes, panels, aerial/underground conversions, etc.

With a single device, any types of cables can be identified in both Medium and Low Voltage and it does not require calibration prior to identification.

Standardized for electrical safety procedures, by world’s leading Electric utilities.

Main features

• Safely cable identification
• De-energized cable identification
• Live MV cable identification
• Live LV cable identification
• Single-phase and three-phase cables 
• Signal injection:
  • Direct connection
  • Induction through toroidal clamp (optional) 
• Max. cable length 50 Km (direct connection)
• Rechargeable battery in TX, operation time >24h
• Detects amplitude and polarity of the active signal
• Identification sound alert (CI-RX)

View a video：Ariadna CI MV energized cable identifier 

Energised Medium Voltage cable identification with the Ariadna CI

Ariadna CI. Cable identification

Working diagram

Energized MV cable identification | Connection diagram

Energized LV cable identification | Connection diagram

De-energized cable identification (MV and LV) | Connection diagram

Single phase cable

Direct connection
Induction connection

Three phase cable

Direct connection
Induction connection

*Specifications subject to change without notice

Ariadna CI-TX Transmitter

Ariadna CI-RX Receiver

Compliance standards

Electromagnetic compatibility: EN 61000-6-3, EN 61000-6-2

Electrical safety: EN61010-1 CAT IV 300V, Protection against electric shock, Class II