DrySyn Vortex Blend overhead stirrer

問題：研究科學家通常會使用標準實驗室燒杯進行需要加熱和強力攪拌的多次混合實驗。一般方法是在加熱板上牢牢的夾緊加熱燒杯或相關容器，同時使用頂置馬達從上方混合。但如果需要同時進行多項實驗，這種佈置可能會佔用大量排氣罩空間。而且在馬達速度和加熱速度變化並聯工作的情况下，不能夠確保每個燒杯中產生相同的條件。

解決方案：Vortex Blend為科學家提供了一種緊密空間的節省方法，可以同時進行3個混合實驗。除了通過使用三向變速箱和加熱板來節省空間之外，還可以確保實驗在攪拌速度和加熱速度/溫度方面都具有相同的條件。Vortex Blend使用標準的頭頂攪拌器馬達和加熱板進行操作。

The device is particularly relevant to blending and formulation scientists in the oil, cosmetics, cleansing and hygiene industries and is manufactured in the UK.

Problem: Multiple blending experiments will often be carried out by research scientists using standard laboratory beakers, these experiments usually require heating and powerful agitation. The general method is to heat a beaker or relevant container on a hotplate, clamped securely in place and simultaneously mix from above using an overhead motor. However this arrangement can take up a lot of fume hood space if multiple experiments are required in parallel. Also when working in parallel it is not ideal for ensuring identical conditions are created in each beaker with motor speeds and heating rates varying.

Solution: The Vortex Blend offers the scientist a compact space saving way of performing 3 blending experiments in parallel. By saving space using its 3 way gearbox and heating plate it also ensures that the experiments have identical conditions to each other in terms of stirring rate and heating rate/temperature. The Vortex Blend utilizes a standard over head stirrer motor and hotplate for operation.