工作電極座

• 鱷魚夾為銅材質
• 桿的上端用於使用鱷魚夾，將這些電極連接到合適的儀器
• 桿的下端有一個焊接到設備上的鱷魚夾
• 每個電極座附有一個O形圈，可通過將O形圈捲到不同的位置
• 您可以改變安裝在電化學電池中的基板的深度

• 鱷魚夾為銅材質
• 桿的上端用於使用鱷魚夾，將這些電極連接到合適的儀器
• 桿的下端有一個焊接到設備上的鱷魚夾
• 每個電極座附有一個O形圈，可通過將O形圈捲到不同的位置
• 您可以改變安裝在電化學電池中的基板的深度

‘The Gator’ consists of a brass rod (0.75 cm) mounted in the plastic body of the electrode. The upper end of the rod is used to connect these electrodes to an appropriate instrument using either an alligator clip or a 0.060" gold-plated female connector (MF-2004). The lower end of the rod has an alligator clip soldered to the device and covered with a heat shrink. Each electrode comes with a silicon O-ring which fits snugly on the plastic body. By rolling the O-ring to different positions, you can change the depth of the substrate mounted in an electrochemical cell (MR-1195 and MR-3818).

‘The Gator’ consists of a brass rod (0.75 cm) mounted in the plastic body of the electrode. The upper end of the rod is used to connect these electrodes to an appropriate instrument using either an alligator clip or a 0.060" gold-plated female connector (MF-2004). The lower end of the rod has an alligator clip soldered to the device and covered with a heat shrink. Each electrode comes with a silicon O-ring which fits snugly on the plastic body. By rolling the O-ring to different positions, you can change the depth of the substrate mounted in an electrochemical cell (MR-1195 and MR-3818).