Uniqsis Polar Bear PLUS Flow

該儀器由 Cambridge Reactor Design 與位於劍橋大學內的 Steve Ley 教授的創新技術中心 (ITC) 合作開發。
值得注意的是，雖然不比鞋盒大多少，但這款緊湊便攜的裝置可以將反應堆溫度保持在 -40°C 到 +150°C之間！
Polar Bear Plus Flow 反應器易於使用且完全獨立，只需供電即可運行——無需製冷劑、製冷劑或雜亂的傳熱流體！
Polar Bear Plus Flow 與所有標準 Uniqsis 線圈和芯片電抗器相容，是對現有 FlowSyn 的理想且靈活的補充。或者，該反應器模塊可以與 Uniqsis 二元泵模塊組合，作為模塊化流動反應器系統的基礎。

小巧便攜：基本單元小於鞋盒大小！
寬溫度範圍：-40°C 至 +150°C
沒有結冰！– 可以連接氮氣沖洗以確保反應清晰可見
與所有標準 Uniqsis FlowSyn 線圈和芯片電抗器相容

The instrument was developed by Cambridge Reactor Design in collaboration with Professor Steve Ley’s Innovative Technologies Centre (ITC) located within the University of Cambridge.
Remarkably, although not much bigger than a shoe box, this compact and portable unit can maintain reactor temperatures anywhere between -40oC and +150oC!
The Polar Bear Plus Flow reactor is easy to use and is completely self-contained, requiring only an electricity supply for operation – no cardice, refrigerants or messy heat transfer fluids!
Compatible with all standard Uniqsis coil and chip reactors, the Polar Bear Plus Flow makes an ideal and flexible addition to an existing FlowSyn. Alternatively, this reactor module can be combined with a Uniqsis Binary Pump Module as the basis for a modular flow reactor system.

Compact and portable: base unit not much bigger than a shoe box!
Wide temperature range: -40°C to +150°C
No icing-up! – a nitrogen purge can be connected to ensure that the reaction remains clearly visible
Compatible with all standard Uniqsis FlowSyn coil and chip reactors